Olympic Deck, Fence & Siding Stain Semi-Transparent Gallon
- Calculated at Checkout
A penetrating oil-based semi-transparent stain that provides a subtle color and allows the natural wood grain and texture to show.
Why You'll Love This Product
A durable and weather-resistant stain for new, worn and previously stained wood. Semi-transparent stain provides a subtle color that lets the beauty of your wood show through.
Where to Use
- New wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain
- Exterior wood surfaces, such as decks, fences, siding and outdoor furniture
Limited warranty. Lasts up to three (3) years on decks and five (5) years on fences or siding.
One gallon covers approximately 250 to 350 sq. feet or 23.2 to 32.5 sq. meters depending on wood texture and porosity.
Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.
WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.
Test on a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.
Can be applied down to 50°F for <550 g/L VOC version and 35°F for <100 g/L VOC version.
Normally dries in 24 hours when applied at 50°F to 85°F.
Clean brushes and tools with mineral spirits for <550 g/L VOC version and with soap and water for <100 g/L VOC version.